ALPINE 9550 Portable

                 NAM Type:  EEPROM             Manufacturer:  Fujitsu
               Programmer:  Handset           ESN Prefix DEC:  150
                      HEX:  96
  ESN/Serial Number Match:  Yes. Manufacturer prefix + last 4 or 5 digits
     Programmable Handset:  Yes       Available Channels:  832
     Programming Sequence:  Power On                            F + Lock
                            Power Off                            Power On
                            # + 626 + # + 7764726 (within 3 seconds)
                            Hold (*) key until tone stops
                            Enter data for each step then press STOR
                            Press SEND to write data
                         # digits         System ID Format:  5     XXXXX
         Local Use Option:  1     1               MIN Option:  1     1
            Mobile Number:  10    XXX-XXX-XXXX
            Station Class:  2     14
   Initial Paging Channel:  4     0333 or 0334
    Access Overload Class:  2     XX
         Preferred System:  1     1(A) or 0(B)
          Group ID Format:  2     XX
              Unlock Code:  3or4  XXX or XXXX
               Call Timer:  1     4(i)                Auto Lock:  1     1(ii)
         Call Restriction:  1     1(iii)
                         i. Call Timer Increment -  1 Timer Off
                                                    2  6-seconds
                                                    3  30-seconds
                                                    4  60-seconds
                        ii. Auto Lock -  1  Manual Lock, no out
                                         2  Manual Lock, No calls
                                         3  Auto Lock, No out
                                         4  Auto Lock, No calls
                       iii. Call Restriction -  1  No Restriction
                                                2  No Memory Dialing
                                                3  No Long-Distance
                                                4  Both 2 and 3
                                                5  Memory Calls only
     Programming Sequence:  Power On
                            Unlock Phone (if locked)
                            F + 7 + NAM 2, 3 or 4
                            F + LOCK                            Power Off
                            Power On
                            Follow Programming Code and steps from above
          New Unlock Code:  NAM            System Select:  FCN + 1 + X
                             X=1  AB                             X=2  BA
                             X=3  A only                             X=4  B only
                             X=5  Home
Curent status may be reviewed with RCL/ALT + FCN + 1