Nokia 5120 Cellular Telephone
(170-1304)                 Easy NAM Programming

All Nokia 5120 cellular telephones (with software version 3.02 or greater)
are capable of supporting both Random and Default authentication methods.
The programmer must decide which form of A-Key is desired for use.  There
are two methods to program the NAM described below.  If a RANDOM A-Key is
desired for use, use the Easy NAM 1 programming sequence.  If a DEFAULT
A-Key is required, then use the NAM 2 programming sequence.  The clear key
[C], can be used to correct mistakes.

MENU DRIVEN EASY NAM PROGRAMMING FOR NOKIA 5120 HAND PORTABLES

1.  Turn on Phone and Enter Programming Access Code * # 6 3 9 # or * # 6 3
    9 1 # for NAM1 with a Random A-Key value, * # 6 3 9 2 # for NAM2 with
    a Default A-Key Value.

2.  Enter the 10 Digit Area Code and Phone Number and press NAVI Key (note
    the 'OK' softkey in display).

3.  Enter System ID Code (SID) Supplied by Cellular Service Provider (1-5
    Digit SID) and Press the NAVI Key (or 'OK') Key.

      Optional Settings are Language and Lock Code (See below).

      Phone Automatically Powers Off and then Back On.

      Programming is Completed.

Note:  Change the Lock code by adding a pound sign and the new lock code
       after the SID.  (Example: 1 7 5 # 7 7 8 8: Lock Code = 7788).

       Change the Language by adding a pound sign and new language code
       after the code (Example: 1 7 5 # 0: Language = English).

       Language Code: 0 (default) = English, 1 = French, 2 = Spanish, 3 =
       Portuguese.  (Note: Hebrew and Russian are not Selectable via EASY
       NAM programming.)

       Change the Lock Code and Language code by separating each set of
       numbers by a pound sigh (Example: 1 7 5 # 7 7 8 8 # 2; Where the
       SID = 00175, Lock code = 7788, Language code = Spanish).

(1/4/99)