SID PROGRAMMING (MEMORY LOCATIONS 11-40, OPTIONAL)

SID information is stored to memory locations 11-40 in NAM programming mode.
A system ID is entered as a decimal number with either a * (friendly) or a #
(unfriendly) sign in front of each system ID. The phone will automatically
choose the next available memory location when storing the system ID's.

For example, with a new phone the following could be entered:

*3015 [STO] [STO] (this system ID would be friendly and automatically stored
in location 11)

#2556 [STO] [STO] (this system ID would be unfriendly and automatically stored
in location 12)

Checking for SID Data (Memory Location 10)
The SID checksum is stored in memory location 10. Enter [RCL] 10 and the
format of the parametersare shown as:

   [checksum * number of friendly SIDs * # number of unfriendly SIDs #].

EXAMPLE 3:
23433*01#02#  The checksum=23433, one friendly SID and two unfriendly SIDs
are programmed.

Clearing SID
To clear one SID location, press and hold [CLR], the screen will clear then
enter [STO], number of location to clear, [STO]. To clear all SID data, press
and hold [CLR], the screen will clear then enter [STO] 10 [STO].